IPC Plumbing Code AI
AI-powered International Plumbing Code compliance analysis for plumbing system designs.
Definition
IPC Plumbing Code AI applies artificial intelligence to analyze plumbing designs against the International Plumbing Code. These systems verify fixture unit calculations, pipe sizing, venting requirements, trap configurations, and water supply design. AI helps plumbing engineers and plan reviewers identify code violations before construction.
In Depth
The International Plumbing Code (IPC) governs plumbing system design in most US jurisdictions — fixture counts, pipe sizing, drainage design, and water supply requirements. AI compliance checking automates the code calculations that plumbing engineers perform for every building.
Fixture count verification is the most common compliance check. The IPC specifies minimum plumbing fixture counts based on the building's occupancy type and occupant load. AI calculates the required fixtures (water closets, lavatories, drinking fountains) for each area of the building, compares them against the fixtures shown on the plans, and flags any deficiencies. This check catches the common problem of fixture count shortfalls that result in plan review comments.
Examples
Calculating fixture unit loads for drainage
Verifying plumbing vent sizes and configurations
Checking water supply pipe sizing
Nomic Use Cases
See how Nomic applies this in production AEC workflows:
Frequently Asked Questions
IPC Plumbing Code AI applies artificial intelligence to analyze plumbing designs against the International Plumbing Code. These systems verify fixture unit calculations, pipe sizing, venting requirements, trap configurations, and water supply design. AI helps plumbing engineers and plan reviewers identify code violations before construction.
Calculating fixture unit loads for drainage. Verifying plumbing vent sizes and configurations. Checking water supply pipe sizing.
Automated Code Compliance: Check drawings against 380+ building codes and standards with cited answers. Automated Drawing Review: Automatically review drawings against building codes, internal standards, and client requirements.